Drive eRazer Ultra

www.wiebetech.com
toll-free 1.866.744.8722
Drive eRazer Ultra page
Product name/code: Drive eRazer Ultra
Erase Modes:
Name
 Passes Method
Quick Erase
 1 All zeroes
Multipass Erase
 1-99 Overwrite using user-selected pattern (same pattern each pass)
Secure Erase Normal
 1 Initiate drive's built-in Secure Erase (Normal) command
Secure Erase Enhanced
 1 Initiate drive's built-in Secure Erase (Enhanced) command
DOD Clear
 1 All zeroes
DOD Sanitize
 3 Write a pattern, then its complement, then another unclassified pattern.
NIST 800-88 Clear
 1 All zeroes
NIST 800-88 Purge
 1 Initiate drive's built-in Secure Erase (Normal) command
CSEC ITSG-06
 1 Initiate drive's built-in Secure Erase (Normal) command
HMGIS5 Baseline
 1 All zeroes
HMGIS5 Enhanced
 3 Write zeroes, then ones, then random. Optional user-defined verification pass.
DSD ISM 6.2.92
 1 or 3 if drive > 15GB, 1 pass random character with verification. Optional user-defined verification pass.
if drive < 15GB or pre-2001, 3 pass with arbitrary pattern.
Detects and erases HPAs: Detection always indicated by LED. Handled according to configuration settings.
Detects and erases DCO: Detection always indicated by LED. Handled according to configuration settings.
Switch Guard Yes
Drive Compatibility 2.5" and 3.5" SATA drives.
3.5-inch PATA (IDE) drives
Compatible (via adapters) with 1.8" ZIF drives (Toshiba/Hitachi), 1.8" drives (Toshiba), and 2.5" IDE/PATA drives.
Operating System Compatibility for erasure Operating system not required for erasure.
Drive eRazer operates as a stand-alone device and will erase disks from any operating system.
Operating System Compatibility for dock use Windows 7, XP, Vista Macintosh OS X
Linux distributions that support USB 2.0
Data speeds: Speeds vary depending on the drive model and type. Modern drives operate at 7GB/min.
Operating Humidity: 5% to 95%, noncondensing
Printer Port Specs: 9pin RS-232 (DB9 NULL Modem Cable) - Pins 5, 2, and 3 are used (one way communication)
Baud rate: 9600; Data bits: 8, Stop bits: 0; Parity: none;
Optionally prints 4"x6" or 4"x1"
Sends data in ZPL II format supported by Zebra brand printers.
Power Switch: 2 position: On / Off
Power: Input: +12V AC, 3A: +12V DC Jack, Output: +12V / +5V to drive
Shipping Weights: 2 lbs, including accessories
Dimensions: 3.2" x 2.2" x 0.95" (81mm x 56mm x 24mm) Dimensions are exclusive of attached plates, drives, and cables.
Warranty: 2-year limited warranty. See warranty statement for details and limitations. WiebeTech offers free phone support for 90 days after purchase (1-866-744-8722). After 90 days, email support is available at support@wiebetech.com.